美國美高優質陶瓷釉237mlMayco Stroke & Coat Wonderglaze 237ml

Extremely versatile glaze. It can be applied on wet clay, earthenware bisque, or stoneware bisque, fired from cone 06 (around 1200°C) to cone 10 (around 1285°C), in oxidation or reduction, and used in every decorative way imaginable.

​

It is a heavily pigmented, viscous glaze line that can be used for brush strokes or opaque coverage. Use these glazes to create intricate, detailed designs and butt up to one another without colors moving. When used in a majolica process, Stroke & Coat® will not move nor blend with the colors beneath. 

​

Stroke & Coat® colors are intermixable, allowing artists to create custom shades. Thin with water to create a “wash” or watercolor style of design. Because the liquid color is consistent with the fired color, artists will have no trouble visualizing finished results as they create.

​

One coat will create a translucent finish with subsequent coats adding opacity. We suggest 2-3 coats for full opacity and all over coverage. Let dry between coats. Stroke & Coat® glazes will fire to a gloss finish without clear glaze. However, if desired, a clear glaze (such as S-2101 Crystal Clear Brushing) can be added. 

​

For application on wet or leatherhard clay and firing to cone 04 (around 1046°C) , colors will retain their vibrancy with huge time savings. We recommend leaving an area unglazed, such as the back or bottom of the unfired piece, to allow for out-gassing of the clay during the single-firing process. Limit glazes to 2 coats including design work.

​

Certified AP Non-Toxic, Food Safe and Dinnerware Safe when used according to manufacturer’s directions.

​

Lighter colors can be used over dark colors, remaining bright and opaque, and will not blend with the colors underneath.

​

Many Stroke & Coat® glazes perform well at mid-range (cone 5/6) and higher temperatures (cone 9/10). Darker colors such as red, orange, yellow, blue and green may darken compared to their cone 06 results. Lighter colors such as tan, purple and pink will fade. We recommend testing at your preferred firing temperature prior to use. Cone 6 performance is noted on each color’s label.

​

*Colour swatches provided are Cone 6 chips that have been fired flat in oxidation on white stoneware body.